MIDAS CIVIL NX tools (MIDAS IT Europe)

MCP server · hosted · v0.7.0 · com.midasiteurope/civil-nx

Online · tested 4h agoNEW · 5h agoSeen in the registry 4h ago

Build, check and report on MIDAS CIVIL NX bridge models through the MIDAS IT Europe plugins.

What it does

MIDAS CIVIL NX tools (MIDAS IT Europe) is an MCP server, a connector that lets an AI assistant use it as a tool. It is hosted: an assistant connects to it over the internet, nothing to install.

No capability identified yet from its description.

Facts come from the Official MCP Registry, as declared by the publisher. Capabilities are matched automatically (low confidence). None of this is a test of the tool.

At a glance

Hosted (remote)YES

Local installNO

Live checkOnline · 69 tools

Version0.7.0

PriceNot in the registry

First seen26 Oct 2026

Last checked4h ago

How to connect

As declared in the Official MCP Registry · hosted endpoint tested by Electra Index 4h ago (live check)

Hosted endpoint

https://midasiteurope.com/mcp streamable-http

In Claude Code: claude mcp add --transport http midas-civil-nx-tools-midas-it-europe https://midasiteurope.com/mcp

MCP settings (Claude Desktop, Cursor and other MCP clients)

{
  "mcpServers": {
    "midas-civil-nx-tools-midas-it-europe": {
      "url": "https://midasiteurope.com/mcp"
    }
  }
}

Live check

Electra Index connected to the hosted endpoint 4h ago

ONLINE MIDAS CIVIL NX tools (MIDAS IT Europe) answered an MCP connection on 26 Oct 2026 and introduced itself as civil-nx 0.7.0 (MCP protocol 2025-06-18).

69 tools offered to AI assistants

auto_structure_groups · Creates one structure group per section, per material, or per section + material pair, with the Auto Structure Groups plugin's own engine: it reads every element's section and material, names each group from the prefix and the section/mater
auto_structure_groups_undo · Reverses an auto_structure_groups run from the ledger: deletes the groups it created and puts every group it added members to back exactly as it was (from the snapshot taken just before the write). Refuses while a construction stage uses on
b2p_survey · Reads the model the way the Beam to Plate plugin (1.0.6) does and studies every section the chosen beams use, against CIVIL NX's own published properties (/ope/SECTPROP): whether the outline was READ correctly (A/Iyy/Izz vs published) and h
b2p_convert · Converts beam elements into a plate (or solid) mesh of their cross-section with the Beam to Plate plugin's own engine (1.0.6): every section CIVIL NX gives geometry for (rolled/fabricated steel, PSC, boxes, composite, tapered groups, VALUE,
b2p_undo · Undoes a b2p_convert run from the ledger with the plugin's own Undo: removes the virtual beams, the plates/solids, the rigid links and construction-joint links, the converted loads and the nodes it made, gives the stages and boundary groups
bridge_reshape_read · Reads the open model the way the Bridge Reshaper plugin (1.0.5) does: the deck (straight, in straight pieces kinked at half-joints or piers, or curved; beam girders, girders meshed as plates, or a spine (single-line) model with its pylons,
bridge_reshape · Changes the geometry of the bridge in the open model in place, with the Bridge Reshaper plugin's own engine (1.0.5): new span lengths (the deck is stretched - each span keeps its element count), a skew for each support, a new horizontal ali
bridge_reshape_undo · Undoes a bridge_reshape run from the ledger with the plugin's own Undo: every row the run overwrote is written back and every row it created is removed, so the model returns exactly. Refuses on a different model, or when the model was edite
concurrent_forces_setup · Concurrent Force Reporter, step 1. Reads the open CIVIL NX model the way the plugin does when it connects and lists what a concurrent-forces run can use: every load case and combination (all ten LCOM tables) with how MIDAS addresses it, whe
concurrent_forces · Concurrent Force Reporter, step 2. For a set of items (elements, nodes, links), finds the load state that makes ONE key effect extreme at ONE key item (max, min or absolute max over the selected load cases and combinations, at every output
concurrent_forces_probe · Concurrent Force Reporter diagnostics. For each result source the plugin reads (beam, truss, plate, general link, elastic link, node reaction, node displacement), asks this CIVIL NX build with one item of that kind which table token answers
cs454_lane_layout · Lays out CS 454 notional lanes, remaining areas, footways and strips on a carriageway cross-section with the CS454 - Moving Load Wizard's own layout engine (Table 5.9a, cl 5.10, ALL model 1 single/convoy, ALL model 2, SV/HB placements), and

Show 57 more

cs454_moving_loads · CS 454 assessment live loading with the CS454 - Moving Load Wizard plugin's own engine: notional lanes laid out on the carriageway (line lanes on a grillage, surface lanes on a plate deck), the ALL model 1/2 vehicles up to the chosen level,
cs454_moving_loads_undo · Removes the lanes, vehicles, cases and groups a cs454_moving_loads run wrote, using the plugin's own cleanup: anything edited since the run, or still used by something else, is kept. Previews unless apply: true.
cs455_describe_section · Start here when the user shares a reinforcement drawing, photo or schedule. Read from it: cover, for each face the layers (number of bars or spacing, and Ø - mm, inches or #US sizes are all accepted), side bars, links (Ø, legs, spacing); th
cs455_assess · CS 455 ULS assessment of reinforced concrete beam sections with the plugin's own engine: reads the concurrent force rows (BEAMFORCE / BEAMFORCEVBM for envelopes and moving loads, kN·m; a moving-load case from a model analysed without 'Norma
cs455_export_calc_sheet · The report. Assesses one element end exactly as cs455_assess and writes the plugin's reference-format calculation sheet (.xlsx: A4 pages, title block, geometry, materials, reinforcement, section properties, sagging/hogging bending, shear an
cs_stage_summary · Reads the construction stage definition of the open CIVIL NX model with the Construction Stage Reporter plugin's engine and returns, per stage: duration and day range, the structure groups activated (with age and element count) and deactiva
cs_stage_results · Reads construction-stage analysis results the way the Construction Stage Reporter plugin does (POST /post/TABLE in the construction-stage family, every stage in one query at its last step; stages after the analysis stopped carry the stage b
cs_stage_report · Makes the Construction Stage Reporter plugin's own reports of the open model's construction stages and returns download links (never the file inline): the Excel workbook (summary, stage matrices for structure/boundary/load groups, group tab
culvert_preview · Validates a 2D Culvert project with the plugin's own Eurocode core and returns what it would build: nodes, elements, soil springs, basic load cases (traffic unit cases), the EN 1990 Annex A2 combination counts (ULS, SLS characteristic, quas
culvert_build · Writes the 2D Culvert model exactly as the plugin's Build: units, user material, sections, frame, soil springs, supports, every basic load case with its loads, and the nested EN 1990 Annex A2 combinations; then reads the loads back and fail
culvert_build_undo · Deletes every row a culvert_build wrote (combinations, loads, load cases, springs, supports, groups, elements, nodes, sections, material) from the ledger's record, and puts back the model's units. A model replaced by newDocument cannot be b
culvert_analyse_and_check · On the culvert model built from the same inputs (refused if the open model's counts differ): runs the CIVIL NX analysis (unless analyse: false), reads the basic-case results (forces, reactions, displacements) and runs the plugin's checks —
culvert_report · Runs the checks on the analysed culvert model (as culvert_analyse_and_check, without re-analysing unless analyse: true) and writes the plugin's report: format xlsx (default) = the calculation book in the MIDAS report format with result diag
dxf_inspect · Reads a DXF with the Advanced DXF Importer plugin's own parser and clean-up and reports what an import would create: the file (version, encoding, entity counts, what is ignored or unsupported), its units, every layer with its entities and m
dxf_import · Imports a DXF into the open CIVIL NX model with the Advanced DXF Importer plugin's engine: the same parse, layer mapping, clean-up and write as the plugin. Nodes and elements get new ids above the model's (existing rows are never overwritte
dxf_import_undo · Removes what one dxf_import created, with the plugin's own removal rules: it refuses unless the import's master group is in the open model; deletes the import's elements, then its nodes, only where they still match the fingerprint taken bef
ec_wind_bridge · Calculates EN 1991-1-4 §8 wind actions on a bridge deck with the Eurocode Wind Loads plugin's own engine: v_b, q_p(z_e), c_sc_d, d_tot, the transverse (x), longitudinal (y) and vertical (z, at e = ±b/4) forces, and the load cases the plugin
ec_wind_read_deck · Reads the open model the way the Eurocode Wind Loads plugin does: finds the deck (or measures the elements / group given), and reports b, d, L, the soffit height, the span axis, whether the deck is beams or plates, and a structural-form gue
ec_wind_apply · Calculates §8 wind on the deck and writes it with the Eurocode Wind Loads plugin's adapter: one EC1W_ load case per global direction, then beam loads (beam deck) or a pressure + fascia nodal loads (plate deck) on the target elements — one e
ec_wind_remove · Removes what the Eurocode Wind Loads plugin writes: every EC1W_ load case, its load group, and their beam/pressure/nodal loads — whether this tool or the plugin window wrote them. Loads anyone else put on the same elements are kept. Preview
skew_grillage · Generates a bridge deck (beam grillage or plate mesh) with the Skew Grillage Geometry Generator plugin's own engine: skew, unequal girders, plan curvature, multi-span, crossfall and vertical profile, automatic transverse section sizing and
skew_grillage_undo · Removes the deck a skew_grillage run wrote (its elements, nodes, new structure groups and any default properties nothing else uses). Refuses while lanes, other groups or other elements still depend on it. Previews unless apply: true.
civil_status · Checks the MAPI connection to CIVIL NX and summarises the open model: units, moving load code, row counts per table, structure/boundary/load group names, static load cases, stages, general combinations, and the most recent runs recorded for
civil_read_table · Reads one MIDAS database table (GET /db/<TABLE>) from the open model, e.g. NODE, ELEM, SECT, GRUP, STLD, STAG, LLAN, MVLDBS, LCOM-GEN. Returns rows keyed by id: the ids asked for, or the first `limit` rows. Read-only.
job_status · Status, progress and (when finished) the result of a tool call that returned a jobId. Poll every few seconds until status is done or failed.
model_qc_check · Runs the Model Report plugin's fourteen quality checks on the open CIVIL NX model: duplicate (coincident) nodes, orphan nodes, zero-length and duplicate elements, elements without material/section, unused properties, disconnected regions, s
model_report_images · Lists the CIVIL NX pictures the Model Report can put in this model's report, with their keys: FE model views (iso, plan, front, side), the applied loads of each static load case, the figures saved in the model (/db/UFIG), and the beam diagr
model_report_export · Builds the Model Report plugin's 'Model report' for the open CIVIL NX model — cover, contents, materials, sections (with drawings), supports and springs, load cases, combinations and loads, nodes/elements/groups appendix, cross sections, te
model_bridge_summary · Reads the open model's geometry tables and CIVIL NX's computed section properties and reports the bridge the Model to IFC plugin finds in it: girder lines, piers and pylons (station, elements, bearings, foundations), abutments, bearings, th
model_to_ifc · Exports the open CIVIL NX model to IFC with the Model to IFC plugin: real section outlines with voids, smooth tapers, tendons, composite deck slabs, materials, structure groups and stages; in IFC4.3 also the bridge structure (deck, piers, a
model_to_dxf · Draws the open CIVIL NX model as DXF with the Model to IFC plugin's drawing engine: a 2D drawing file (DXF 2000: plan, elevation developed along the deck, hidden-line isometric, section cuts with hatched faces and tendon ducts, and every se
create_nodes · Creates nodes in the open CIVIL NX model from X, Y, Z coordinates with the Node Generator plugin's own engine: every check the plugin window makes (blank or non-numeric coordinates, bad or duplicate ids, ids above 999999, ids that already e
create_nodes_undo · Reverses a create_nodes run from the ledger: deletes the nodes it created and moves every node it overwrote back to its earlier coordinates. Refuses while elements, structure groups or supports use the nodes it created (undo those first). D
pd6694_route_a · PD 6694-1 integral abutment earth pressures by the limit-equilibrium route (K*, cl.9.4.3/9.4.4) with the PD 6694-1 Integral Abutment plugin's own engine: thermal movement and design displacement, the route (A1/A2, or B / review when Annex A
pd6694_route_a_write · Writes the four PD 6694 limit-equilibrium states as plate pressures on one or two abutment wall groups, exactly as the plugin's Write button: same-model guard, the PD6694 EP load cases and groups, pressure items (other loads on the plates k
pd6694_route_a_remove · Removes the four PD6694 EP limit-equilibrium load cases with their pressures, load groups and stage activations (the plugin's Remove). Other load cases are kept. Previews unless apply: true.
pd6694_ssi_plan · Plans the PD 6694-1 Annex A soil-structure interaction run on the open model with the plugin's planner: spring nodes on each wall, piles, the stiffness range, and every blocker. Read-only.
pd6694_ssi_run · Runs the PD 6694-1 Annex A iteration with the plugin's own runner: Winkler springs on the walls (multi-linear), repeated analyses until the wall displacements settle, then the two design pressure cases written and the analysis set-up remove
pd6694_ssi_remove · Removes everything an SSI run left (design pressure cases, spring groups, analysis cases) and restores the model's own springs from the run's backup (the plugin's Remove SSI). Previews unless apply: true.
slab_capacities_from_bars · Bar arrangement → everything the RC Slab & Shell Assessment routes need, with the plugin's own core: per layer area, d, x, z, moment capacity (kNm/m) and force (kN/m); the Denton/Wood-Armer capacity pairs, the four Annex LL steel forces and
slab_survey · Reads the open model's plates (ELEM/NODE), structure groups, static cases and combinations (all LCOM tables) the way the RC Slab & Shell Assessment plugin does: orientation groups by plate normal (with a suggested in-plane reference directi
slab_assess · Reads plate forces (PLATEFORCEUL, element local axes) for one orientation group and the given load cases, rotates them to the reinforcement direction and assesses every position with the plugin's own core (Denton, Wood-Armer, sandwich, Anne
slab_explain_location · The working behind one element's utilisation: reads that element's plate forces, picks its governing position and case (or the one given) and re-runs it through the plugin's explain_location — every route, face, utilisation and intermediate
result_table_catalog · Lists the CIVIL NX tables the Bulk Tabular Result Exporter plugin can export, with each one's id, MIDAS TABLE_TYPE or /db endpoint, components and the arguments it takes: analysis results (reactions, displacements, beam/truss/plate/solid fo
preview_result_table · Reads one table from the open CIVIL NX model the way the exporter's 'Preview this table' does and returns its first rows (default 20, max 200) with unit-labelled headers, any sub-tables (e.g. reaction totals) and the exact POST /post/TABLE
export_result_tables · Exports one or more CIVIL NX tables (each like the preview_result_table arguments, full scope, no sampling) into one Excel workbook built by the exporter plugin: one sheet per table (and per sub-table; split above 1,048,575 rows), unit-labe
section_preview · Checks a cross-section's outlines with Section Designer's own rules (closed, not self-crossing, holes inside their outline, no overlaps, materials) and returns a PNG drawing of it — the outlines, numbered input vertices, the centroid and ch
section_properties · Computes the full CIVIL NX property set of a section with Section Designer's solver: exact area, centroid, second moments, extreme fibres and perimeters from the outlines, and torsion J and shear areas ASY/ASZ from a finite-element mesh ref
section_write · Writes a section into the open CIVIL NX model exactly as Section Designer's Write button does: VALUE/GEN, PSC/VALU or COMPOSITE-GEN with its computed properties (CIVIL keeps them as sent), in the model's units read at the time of writing, t
section_write_undo · Reverses a section_write run from the ledger: deletes the section it created (refused while elements use it), or writes back the section it replaced, then reads back. Default: the latest section_write run not yet undone. Previews unless app
section_read · Without id: lists the model's sections (id, name, type, whether Section Designer can edit it) and the next free id. With id: returns a drawn section (VALUE/GEN, PSC/VALU, COMPOSITE-GEN) as outlines in section_preview's input format, in unit
stage_groups · Creates structure groups with the Construction Stage Wizard plugin's group builder: pick a scope of elements, split it by rules (slice along X/Y/Z into n segments or at cuts, by section, material, element type, thickness, id ranges, existin
construction_stages · Builds a construction stage sequence with the Construction Stage Wizard plugin's bulk generator and writes it with its stage planner (which keeps composite sections and construction-stage load combinations intact, rewriting and restoring th
stages_undo · Restores the rows a stage_groups or construction_stages run changed, from the snapshot taken just before it wrote (the plugin's own restore). Default: the latest run not yet undone. Previews unless apply: true.
stress_element_loads · Reads what the Stress Profile Generator can show for chosen beam elements: each element's section (type, outline verified, composite parts, tapered), material, length, the load cases / combinations / envelopes CIVIL NX publishes results for
stress_profile · The Stress Profile Generator's profile for ONE beam element: from CIVIL NX's beam forces and the true section outline it calculates σx (or σx from N / My / Mz, τ from Vz / Vy, von Mises, principal, Tresca) over the section at the chosen pos
sls_stress_check · The Stress Profile Generator's SLS report check (EN 1992-2 §7.2 concrete, EN 1993-2 §7.3 structural steel; normal stress σx at the fibres) over many elements × positions × combinations — or, with source stages, its construction-stage checks

What "online" means: the server answered an MCP connection at the time of the check. It is not a guarantee of security, quality or continuous uptime. How we test: we open an MCP session and ask for the tool list, as an AI assistant would. We never run a tool and never send a key. Checked every few days. Method

Is this your server? Monitoring Pro: a check every 30 minutes and an email within the hour when it stops answering. Launch offer: $39.99 once, for life.

Facts & evidence

Each fact shows where it was seen and when.

Fact	Value	Evidence	Source	Last confirmed
Hosted endpoint	https://midasiteurope.com/mcp	DECLARED	SRC-001 Official MCP Registry	4h ago
Local install (package)	no	DECLARED	SRC-001 Official MCP Registry	4h ago
Remote access (hosted)	yes	DECLARED	SRC-001 Official MCP Registry	4h ago
Website	https://midasiteurope.com/llm	DECLARED	SRC-001 Official MCP Registry	4h ago
Registry status	active	DECLARED	SRC-001 Official MCP Registry	4h ago
Version	0.7.0	DECLARED	SRC-001 Official MCP Registry	4h ago
MCP server	yes	DECLARED	SRC-001 Official MCP Registry	4h ago

Change history

NEW26 Oct 2026
first seen in the index

Is this page accurate?

Flag it and our robot re-checks the official source. Reports never change a score.

Is MIDAS CIVIL NX tools (MIDAS IT Europe) still online?

Free alerts · no account

Questions about MIDAS CIVIL NX tools (MIDAS IT Europe)

How do I connect MIDAS CIVIL NX tools (MIDAS IT Europe)?

Use the hosted endpoint https://midasiteurope.com/mcp in your assistant's MCP settings. The exact settings are in "How to connect" above, as declared in the Official MCP Registry.

What tools does MIDAS CIVIL NX tools (MIDAS IT Europe) offer?

When Electra Index connected on 26 Oct 2026, it listed 69 tools: auto_structure_groups, auto_structure_groups_undo, b2p_survey, b2p_convert, b2p_undo, bridge_reshape_read, bridge_reshape, bridge_reshape_undo and more. The full list is in "Live check" above.

Is MIDAS CIVIL NX tools (MIDAS IT Europe) online?

Yes. Its hosted endpoint answered an MCP connection from Electra Index 4h ago.