List your agent

Future Micro Mold Lab

MCP server● Hosted · onlinev1.0.0

Scientific-molding calculators: viscosity curve, gate seal, cavity balance, Cpk and gage R&R

Reviews

No review yet. Used Future Micro Mold Lab? Be the first to help others choose.

What it does

Future Micro Mold Lab is an MCP server, a connector that lets an AI assistant use it as a tool. It is hosted: an assistant connects to it over the internet, nothing to install.

No capability identified yet from its description.

Facts come from the Official MCP Registry, as declared by the publisher. Capabilities are matched automatically (low confidence). None of this is a test of the tool.

At a glance

Hosted (remote)YES
Local installNO
Version1.0.0
PriceNot in the registry
First seen16 Nov 2026
Last checked1d ago

How to connect

As declared in the Official MCP Registry · hosted endpoint tested by Electra Index 1d ago (live check)

Hosted endpoint

  • https://www.futuremicromoldllc.com/api/mcp streamable-http

In Claude Code: claude mcp add --transport http future-micro-mold-lab https://www.futuremicromoldllc.com/api/mcp

MCP settings (Claude Desktop, Cursor and other MCP clients)

{
  "mcpServers": {
    "future-micro-mold-lab": {
      "url": "https://www.futuremicromoldllc.com/api/mcp"
    }
  }
}

Live check

Electra Index connected to the hosted endpoint 1d ago

ONLINE Future Micro Mold Lab answered an MCP connection on 16 Nov 2026 and introduced itself as future-micro-mold-lab 1.0.0 (MCP protocol 2025-06-18).

11 tools offered to AI assistants

  • viscosity_curve · Find the optimal injection velocity from a velocity / peak-pressure sweep. Computes relative viscosity (plastic pressure times fill time) against relative shear rate, locates the shear-thinning plateau, and picks a velocity from the middle
  • cavity_balance · Quantify cavity-to-cavity fill imbalance from short-shot weights. Give two or more replicate shots at a fill level and the result also says whether the variation comes from the cavities (runner and gate geometry) or from shot-to-shot proces
  • pressure_drop · Find where injection pressure is consumed along the flow path. Each reading is the CUMULATIVE peak pressure needed to fill through that section — an air shot gives the nozzle figure, then sprue, runner, gate and the full part — so the value
  • cosmetic_window · Map which combinations of two process parameters produce a cosmetically acceptable part, and how much room surrounds the centre. Sweep wider than you expect the window to be: a passing point on the edge of the range tested means the window
  • gate_seal · Find the hold time at which the gate freezes and part weight stops rising. Seal is the first of three consecutive weights within 0.1% of each other; the recommended production hold time adds a margin of one increment. A weight that falls ba
  • cooling_time · Find the shortest cooling time at which a dimension has stopped changing, and the cycle seconds that come off. Supply the drawing tolerance and the rule tightens to a tenth of it. Measure each part at a consistent interval after ejection —
  • process_capability · Judge whether a running process can hold a dimension inside its tolerance. Reports Cp and Cpk from within-subgroup sigma and Pp and Ppk from overall sigma — the second pair is what a customer's SPC package computes from the same measurement
  • gage_rr · Rate a measurement system from a crossed study: every operator measures every part, the same number of times. Two-way ANOVA per the AIAG Measurement Systems Analysis manual (4th ed.), matching Minitab's crossed gage R&R defaults: the operat
  • get_study_protocol · Return the full procedure for one study: what it is for, the equipment needed, the step-by-step method at the press, and what a good result looks like, so the numbers collected at the press are the ones the calculation needs.
  • plan_process_development · Given the studies already run, return the full development sequence with each one marked done or outstanding, what each fixes, what it depends on, and which study to run next. The order matters: each study fixes a setpoint the next one hold
  • open_study_sheet · Open an empty data sheet for one study in an interactive card: the procedure beside a table the person fills in or pastes into, with the result computed as they type. Also returns the procedure as text and a link to the same calculator on t

What "online" means: the server answered an MCP connection at the time of the check. It is not a guarantee of security, quality or continuous uptime. How we test: we open an MCP session and ask for the tool list, as an AI assistant would. We never run a tool and never send a key. Checked every few days. Method

Is this your server? Monitoring Pro: a check every 30 minutes and an email within the hour when it stops answering. Launch offer: $39.99 once, for life.

Facts & evidence

Each fact shows where it was seen and when.
FactValueEvidenceSourceLast confirmed
Hosted endpointhttps://www.futuremicromoldllc.com/api/mcpDECLAREDSRC-001 Official MCP Registry1d ago
Local install (package)noDECLAREDSRC-001 Official MCP Registry1d ago
Remote access (hosted)yesDECLAREDSRC-001 Official MCP Registry1d ago
Websitehttps://www.futuremicromoldllc.com/lab/mcpDECLAREDSRC-001 Official MCP Registry1d ago
Registry statusactiveDECLAREDSRC-001 Official MCP Registry1d ago
Version1.0.0DECLAREDSRC-001 Official MCP Registry1d ago
MCP serveryesDECLAREDSRC-001 Official MCP Registry1d ago

Change history

  • NEW16 Nov 2026
    first seen in the index

Is this page accurate?

Flag it and our robot re-checks the official source. Reports never change a score.

Do you run Future Micro Mold Lab? Know when it stops answering

For publishers · optional

Its hosted endpoint can be monitored. Monitoring Pro connects every 30 minutes like an AI assistant, emails you within the hour when it stops answering, keeps a 90-day availability history and adds your answer rate to your badge.

Monitor Future Micro Mold LabLaunch offer $39.99 once, for life instead of $9.99/month · All plans

Monitoring never changes a score or a rank.

Are you the publisher of Future Micro Mold Lab?

Free · show your listing

An independent listing builds trust with your buyers. Announce it, and add the badge to your website or README.

Announce it on LinkedIn
Listed on Electra IndexListed on Electra Index
<a href="https://electraindex.com/mcp/future-micro-mold-lab?utm_source=badge&utm_medium=share&utm_campaign=listing"><img src="https://electraindex.com/api/badge/future-micro-mold-lab/card" width="260" height="72" alt="Listed on Electra Index"></a>

Questions about Future Micro Mold Lab

How do I connect Future Micro Mold Lab?

Use the hosted endpoint https://www.futuremicromoldllc.com/api/mcp in your assistant's MCP settings. The exact settings are in "How to connect" above, as declared in the Official MCP Registry.

What tools does Future Micro Mold Lab offer?

When Electra Index connected on 16 Nov 2026, it listed 11 tools: viscosity_curve, cavity_balance, pressure_drop, cosmetic_window, gate_seal, cooling_time, process_capability, gage_rr and more. The full list is in "Live check" above.

Is Future Micro Mold Lab online?

Yes. Its hosted endpoint answered an MCP connection from Electra Index 1d ago.