List your agent

EngScript Engineering MCP

MCP server● Hosted · onlinev1.0.0

Engineering calculation MCP server for oil and gas engineering applications

Reviews

No review yet. Used EngScript Engineering MCP? Be the first to help others choose.

What it does

EngScript Engineering MCP is an MCP server, a connector that lets an AI assistant use it as a tool. It is hosted: an assistant connects to it over the internet, nothing to install.

No capability identified yet from its description.

Facts come from the Official MCP Registry, as declared by the publisher. Capabilities are matched automatically (low confidence). None of this is a test of the tool.

At a glance

Hosted (remote)YES
Local installNO
Version1.0.0
PriceNot in the registry
First seen26 Sept 2026
Last checked1d ago

How to connect

As declared in the Official MCP Registry · hosted endpoint tested by Electra Index 1d ago (live check)

Hosted endpoint

  • https://engscript.com/mcp streamable-http

In Claude Code: claude mcp add --transport http engscript-engineering-mcp https://engscript.com/mcp

MCP settings (Claude Desktop, Cursor and other MCP clients)

{
  "mcpServers": {
    "engscript-engineering-mcp": {
      "url": "https://engscript.com/mcp"
    }
  }
}

Live check

Electra Index connected to the hosted endpoint 1d ago

ONLINE EngScript Engineering MCP answered an MCP connection on 16 Nov 2026 and introduced itself as engscript 1.0.0 (MCP protocol 2025-06-18).

60 tools offered to AI assistants

  • MIXTURE · Primary thermodynamic property calculator. Use this tool first for all mixture property calculations. Supports hydrocarbons and non-hydrocarbon chemicals (PR EOS flash calculation).
  • CARBON · Calculate thermodynamic properties of hydrocarbon mixture. Supports hydrocarbons and non-hydrocarbon chemicals (PR EOS flash calculation).
  • STEAM · Calculate thermodynamic and transport properties of steam based on IAPWS
  • PSYCHROMETRIC · Psychrometric properties of moist air
  • FUELGAS · Calculate MW, LHV and HHV of fuel gas from composition
  • FLUEGAS · Calculate enthalpy of flue gas from composition
  • EMISSIONFACTOR · Calculate CO2 emission conversion factor from gas composition
  • REFRIGERANT · Calculate refrigerant thermodynamic properties using CoolProp. Provide Fluid name and any 2 state variables from: T, P, rho, H, S, U. Returns all remaining properties: T, P, rho, H, S, U, Cp, Cv, viscosity, conductivity, molecular weight.
  • PTV · Calculate gas molar volume using equation of state
  • MtoV · Convert mass flow rate to volumetric flow rate at standard condition
  • VtoM · Convert volumetric flow rate to mass flow rate at standard condition and normal condition Sm3/hr, Nm3/hr, SCFH
  • Pmean · Calculate mean pressure between inlet and outlet
Show 48 more
  • PIPEFF · Calculate Darcy friction factor based on Reynolds number and pipe roughness
  • STEAMPH · Calculate mass flow from pin-hole on the steam piping
  • STEAMLEAK · Calculate steam leak mass flow and flow condition (CHOKED / SUBCRITICAL) based on upstream and downstream conditions
  • PIPEINSUL · Calculate optimal pipe insulation thickness to limit outer surface temperature (burn protection) and minimise heat loss. Uses cylindrical heat conduction + external convection model, solved via scipy.optimize.brentq. Returns exact minimum t
  • PIPESTEAM · Calculate steam pipe sizing: pipe diameter, velocity, pressure drop
  • PIPEWATER · Calculate water pipe sizing: pipe diameter, velocity, pressure drop
  • PIPEAIR · Calculate compressed air pipe sizing: pipe diameter, velocity, pressure drop
  • PIPENITROGEN · Calculate nitrogen pipe sizing: pipe diameter, velocity, pressure drop
  • PIPEFLOWGAS · Calculate isothermal gas pipe flow: density, volumetric flow rate, mass flow rate from pressure drop
  • PIPEFLOWLIQ · Calculate liquid pipe flow: volumetric flow rate and mass flow rate from pressure drop
  • CVGAS · Calculate gas control valve Cv and Kv from flow conditions
  • CVLIQ · Calculate liquid control valve Cv and Kv from flow conditions
  • CVSTEAM · Calculate steam control valve Cv and Kv from flow conditions
  • ORIFICEGAS · Gas orifice sizing / differential pressure / flow rate calculation based on ISO 5167 orifice. Exactly ONE of [M, dP, D2] must be set to '?' — that variable will be calculated.
  • ORIFICELIQ · Liquid orifice sizing / differential pressure / flow rate calculation based on ISO 5167 orifice. Exactly ONE of [M, dP, D2] must be set to '?' — that variable will be calculated.
  • VENTURIGAS · Gas Venturi tube sizing / differential pressure / flow rate calculation based on ISO 5167 Venturi meter (as cast convergent venturi tube). Exactly ONE of [M, dP, D2] must be set to '?' — that variable will be calculated.
  • VENTURILIQ · Liquid Venturi tube sizing / differential pressure / flow rate calculation based on ISO 5167 Venturi meter (as cast convergent venturi tube). Exactly ONE of [M, dP, D2] must be set to '?' — that variable will be calculated.
  • PSVGAS · Calculate required PSV (pressure safety valve) relief area for gas/vapor service per API 520
  • PSVSTEAM · Calculate required PSV (pressure safety valve) relief area for steam service per API 520
  • PSVLIQ · Calculate required PSV (pressure safety valve) relief area for liquid service per API 520
  • PUMPBHP · Calculate pump brake horsepower
  • COMPPOLYEFF · Calculate polytropic efficiency of compressor
  • TBNEFF · Calculate steam turbine isentropic efficiency
  • STGEFF · Calculate multistage steam turbine isentropic efficiency
  • HTRINOUTEFF · Calculate fired heater heat duty and efficiency from inlet/outlet conditions and composition
  • HTRLOSSEFF · Calculate fired heater loss efficiency from ambient temperature, stack gas temperature and excess oxygen
  • HEXRF_KD · Heat exchanger fouling resistance back-calculation from shell/tube-side operating conditions using Kern + Dittus-Boelter.
  • HEXRF · Heat exchanger fouling resistance back-calculation from shell/tube-side operating conditions using Kern + Dittus-Boelter.
  • HEXRF_DG · Heat exchanger fouling resistance back-calculation from shell/tube-side operating conditions using Delaware + Gnielinski.
  • LMTD · Calculate LMTD of heat exchanger
  • STEAMFLASH · Calculate flash steam flow from pressure reduction
  • DESUPERHEATER · Calculate boiler feed water flow and total flow from pressure and temperature reduction through desuperheater. Also returns the inlet/outlet/BFW specific enthalpies (h_in, h_out, h_bfw) used in the mass balance, always in Btu/lb.
  • HPADEPRESS · Calculate depressurization gas volume and hold time for high pressure air storage vessel
  • GN2DEPRESS · Calculate depressurization gas volume and hold time for gaseous nitrogen storage vessel
  • LN2DEPRESS · Calculate depressurization gas volumn abd hold time and saturation temperature for liquid nitrogen storage vessel
  • STMDEPRESS · Calculate depressurization steam volumn and hold time for steam accumulator
  • CTWREVAPOR · Cooling tower evaporation rate: mass removal rate (MR) and heat removal rate (QR)
  • CTWRLG · Cooling tower L/G ratio calculation
  • CTWRNTU · Cooling tower NTU and characteristic C value calculation
  • CTWRCAPA · Cooling tower capacity evaluation
  • CTWRCAPADSNTST · Cooling tower capacity evaluation: design vs test
  • DVR · Data Validation and Reconciliation
  • advDVR · Advanced Data Validation and Reconciliation including gross error detection and elimation
  • BALANCE · General mass/energy balance solver using GEKKO
  • FORMULA · Generic formula calculator with unit conversion and IF-THEN-ELSE
  • SOLVE · Solve nonlinear equations with unknown variables using fsolve
  • ECONOMIC · Economic analysis: NPV, IRR, Simple Payback, Profitability Index, EAC
  • advECONOMIC · Advanced Economic analysis with inflation, depreciation, and tax: NPV, IRR, Simple Payback, Profitability Index, NCF

What "online" means: the server answered an MCP connection at the time of the check. It is not a guarantee of security, quality or continuous uptime. How we test: we open an MCP session and ask for the tool list, as an AI assistant would. We never run a tool and never send a key. Checked every few days. Method

Is this your server? Monitoring Pro: a check every 30 minutes and an email within the hour when it stops answering. Launch offer: $39.99 once, for life.

Facts & evidence

Each fact shows where it was seen and when.
FactValueEvidenceSourceLast confirmed
Hosted endpointhttps://engscript.com/mcpDECLAREDSRC-001 Official MCP Registry1d ago
Local install (package)noDECLAREDSRC-001 Official MCP Registry1d ago
Remote access (hosted)yesDECLAREDSRC-001 Official MCP Registry1d ago
Registry statusactiveDECLAREDSRC-001 Official MCP Registry1d ago
Version1.0.0DECLAREDSRC-001 Official MCP Registry1d ago
MCP serveryesDECLAREDSRC-001 Official MCP Registry1d ago

Change history

Baseline
No change detected yet. History builds up as the robots revisit this server.

Is this page accurate?

Flag it and our robot re-checks the official source. Reports never change a score.

Do you run EngScript Engineering MCP? Know when it stops answering

For publishers · optional

Its hosted endpoint can be monitored. Monitoring Pro connects every 30 minutes like an AI assistant, emails you within the hour when it stops answering, keeps a 90-day availability history and adds your answer rate to your badge.

Monitor EngScript Engineering MCPLaunch offer $39.99 once, for life instead of $9.99/month · All plans

Monitoring never changes a score or a rank.

Are you the publisher of EngScript Engineering MCP?

Free · show your listing

An independent listing builds trust with your buyers. Announce it, and add the badge to your website or README.

Announce it on LinkedIn
Listed on Electra IndexListed on Electra Index
<a href="https://electraindex.com/mcp/engscript-engineering-mcp?utm_source=badge&utm_medium=share&utm_campaign=listing"><img src="https://electraindex.com/api/badge/engscript-engineering-mcp/card" width="260" height="72" alt="Listed on Electra Index"></a>

Questions about EngScript Engineering MCP

How do I connect EngScript Engineering MCP?

Use the hosted endpoint https://engscript.com/mcp in your assistant's MCP settings. The exact settings are in "How to connect" above, as declared in the Official MCP Registry.

What tools does EngScript Engineering MCP offer?

When Electra Index connected on 16 Nov 2026, it listed 60 tools: MIXTURE, CARBON, STEAM, PSYCHROMETRIC, FUELGAS, FLUEGAS, EMISSIONFACTOR, REFRIGERANT and more. The full list is in "Live check" above.

Is EngScript Engineering MCP online?

Yes. Its hosted endpoint answered an MCP connection from Electra Index 1d ago.